Application
For level measurement in tanks containing fuel oil EL, L (DIN 51603-1), diesel fuel (EN 590), liquid fuels
as per DIN SPEC 51603-6 and DIN/TS 51603-8 as well as biofuel and biodiesel with up to 100 %
FAME (EN 14214). This product is therefore ideal for all ecologically upgraded fuel oil consuming sys-
tems that use the new paraffi nic fuels HVO or GTL as an admixture or 100 %. Specially suitable for
underground tanks and basement tanks, also for use in fl ood hazard areas and fl ood risk areas. For
fi lling levels from 900 mm to 4,000 mm.
Description
The hydrostatic level indicator consists of a control unit with digital display and a submersible probe
with integrated pressure measuring cell. High measuring accuracy due to electronic sensor (pressure
measuring cell). Simple operation due to device setup via menus. No bearing charts required since all
standard tank shapes are stored. Watertight up to 10 m water column.
Technical specifi cations
Functions
Push-to-read, selection of units,
calculation of total volume
Measuring range
0/400 mbar
Measuring accuracy
±1.5 % FS
Operating temperature range
Medium: –5/+70 °C
Ambient: 0/45 °C
Storage: –5/+70 °C
Display
4-digit, 12 mm high 7-segment LC display with
additional symbols
Displayed values
Litres, m³, %, liquid level in mm
Submersible probe
Housing: Stainless steel 304 (1.4301)
Cable: PVC, 6 m with breather tube
Diaphragm: Stainless steel 316 L (1.4435)
Seals: FKM (Viton)
Spacer: POM, PE
Supply voltage
1 x lithium battery 3.6 V (included)
Service life approx. 5 years
Housing
PA6, glass-fi bre reinforced, blue,
Ø 75 mm, wall mounting
Degree of protection
Control unit: IP 51 (EN 60529)
Submersible probe: IP 68 (EN 60529)
Scope of delivery
■ Control unit with digital display
■ 5 m connection cable to probe
(can be extended by up to 10 m)
■ Moisture-proof junction box (IP 54)
■ Submersible probe with 6 m submersible cable
■ Screw connector kit G1 x G1½ x G2
■ Mounting kit for withdrawal fl ange (PG 9 gland)
■ Wall mounting